3M™ EPX Adhesive DP490 - 50ml Tube Expand

3M™ DP490 Scotch-Weld™ EPX Adhesive - 400ml Tube

3M 3M

New

3M™ DP490 is a two-part thick black Epoxy (EPX) adhesive

It has tough & high strength benefits in the construction of composite assemblies. 

The DP490 offers good resistance to heat, environmental damage and ageing. 

Unit per 1 tube 

More details

£ 93.48

Volume discounts

QuantityDiscountYou Save
12 10% Up to £ 112.18

3M™ DP490 Scotch-Weld™ EPX Epoxy Adhesive is a tough, high performing adhesive. It is a black thixotropic gap filling two component epoxy adhesive.

The DP490 adhesive offers high temperature resistance up to 120°C and high resistance to impact and ageing.

FEATURES OF 3M DP490

ColourBlack
Adhesive FamilyEpoxy
Work Life180 mins
Time To Handling Strength240 - 360 mins
Full Cure (Days)7

APPLICATIONS AND BENEFITS

The 3M™ Scotch-Weld™ EPX structural adhesives range is widely used in product assembly where high mechanical performance is required, and also for sealing and potting in electrical / electronic applications, car panel bonding, composite decking...to name but a few.

BENEFITS OF EPX ADHESIVES

The EPX structural adhesives offer significant advantages – at a low investment cost:
- Reducing costs for combining different materials for the same or better performance
- Eliminating secondary sealing or finishing operations - saving time and money
- Achieving stronger and stiffer structures by improving stress distribution
- Joining a wide variety of materials that are unable to be assembled by traditional methods of fastening

SUITABLE MATERIALS
The DP490 adhesive can be used with materials including -

- Metals
- Glass
- Ceramics
- Glass
- Brick
- Rubber
- Plastic


Don't forget your gun, plunger and nozzles - which are needed to apply this adhesive.

WHAT IS A STRUCTURAL ADHESIVE?
3M’s high-strength structural adhesives are fundamentally load-bearing formulations. Bond strength is often as strong as,  or stronger than the materials joined.


WHY USE A STRUCTURAL ADHESIVE?

Structural adhesives such as the 3M DP490 are chosen for a multitude of assembly operations.

Unlike mechanical fastening methods structural adhesives -
- Do not damage substrates (no holes drilled, weld marks)
- Can join dissimilar substrates
- Distribute stress levels evenly throughout substrates
- Offers weight and waste reduction

Compared to other adhesives, structural adhesives have the highest load baring capability. As well as excellent environmental and chemical resistance.
Structural adhesives cure in an irreversible process which helps provide excellent temperature and solvent resistance.  They do not need access to air to dry; nor moisture (like one-part silicone and polyurethane sealants); and thus have unlimited depth of cure


DIRECTIONS FOR USE OF 3M DP490
  • Place the DP490 cartridge into the 3M EPX Applicator and clip it into position
  • Remove the resealable cap from the D490 cartridge
  • Attach the correct mixer nozzle
  • Expel a small quantity of adhesive and ensure both components flow freely
  • Dispense the adhesive as required
  • When finished with the application either leave the nozzle in place and store, or remove the nozzle, wipe clean the tip, and replace the cap

We'd love to hear from you

If you have any questions about any of our products please call a member of our friendly team on 0844 4438 389 or send us an enquiry using the form below.

Accept Site use cookies