To achieve successful bonding results, it is important to correctly prepare and clean the substrates being bonded. If there is dust, dirt, grease or moisture present on the substrates prior to bonding - there is a big chance that the bond with fail. Mistakes like this can often be costly - so always ensure surfaces are fully prepared with primers and cleaners from First Stop Packaging.
We Stock a wide range of Surface Preparation products including Graphic Remover and Surface Cleaners, from leading brands such as 3M and tesa. If you have any questions related to surface preparation, email our team - firstname.lastname@example.org.
Cleans and degreases surface to ensure optimum adhesion for 3M VHB Tapes. Alternative to 3M VHB Surface Cleaner Sachets. Sold in 1 Litre bottle. Use in conjunction with 3M VHB Tapes (and any other tapes) Units per 1 bottle
use with 3M's range of tapes, to ensure a grease free clean surface Easy to use, disposable wipes Degreases surfaces prior to bonding Use in conjunction with 3M VHB Tape (and other tapes!) Units per 1 box (100)
3M™ Industrial Cleaner Citrus Cleaner 500ml Spray Can Heavy duty industrial cleaner and degreaser Remove substances including grease, oils, printing inks and most noncuring adhesives It is citrus oil based and does not contain acids, caustic, chlorinated or petroleum based solvents The cleaner emulsifies when flushed with water Unit per 1 can
3M Primer 94 can be used to promote adhesion of 3M tapes Creating better bond to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal ansd painted surfaces Sold in 230ml can Use in conjunction with 3M VHB Tapes Units per 1 can
All purpose very fine Scotch-Brite hand abrasive pads Used in a variety of applications Excellent starting point to clean, finish, grain, denib and defuzz May be used by hand, with a hand pad block, or on an in-line sander Abrasive mineral: Very Fine grade aluminum oxide Colour: Maroon Units per pack (20 Pads Per pack)
General purpose industrial cleaner for cleaning and degreasing surfaces Where surfaces are greasy or dirty, wiping with Permaclean II will help to produce a suitable surface for bonding Comes in an aerosol spray for ease of application Spray directly onto the surface to be cleaned then wipe off with clean cloth
Permabond A905 anaerobic surface activator The A905 is designed to allow non-metallic surfaces to be bonded / sealed It accelerates the cure rate of anaerobics Improves bonding to contaminated surfaces Unit per 1 Litre